Rear fender and struts

Made some struts for the Honda today. Pretty pleased with the way they turned out. I used 8mm OD / 6mm ID stainless pipe and a Draper Mini Tube Pipe Bender which is supposedly only to be used with thin-wall copper plumbing pipe but it handled the 1mm wall stainless admirably. At each end of the pipes I created a flat piece in a vice and then drilled a hole through.

At the front-most end of the plastic fender (£15 off ebay) I fitted some aluminium cable straps originally destined for my Lambretta and used them to mount it to the swingarm.